Menu51VQT0T16Menus related to taking picturesª [DATE/TIME]This switches between date and time indications.≥The movie camera automatically records thedate and time of picture taking on the tape.≥You can also show or change the date/timeindication by repeatedly pressing the [DATE/TIME] button on the remote control.ª [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original audio signals can be keptafter the other audio signals are dubbed.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(If audio signals are dubbed, then theoriginal audio signals will be erased.)ª [REC LAMP]Set to [ON] and this turns the recording lamp onduring recording, which indicates that recording isunderway. Set to [OFF] and this does not turn onthe lamp even when recording is underway.ª [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.ª [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 Beep≥When you start recording≥When you turn on the power≥When the unit goes from quick start standbymode to recording pause2 Beeps≥When you pause recording≥When you turn off the power≥When the unit goes into quick start standbymode2 Beeps for 4 times≥When a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs(-59-), and at other times. Check the sentencedisplayed on the screen. (-54-)ª [POWER SAVE][OFF]: When about 5 minutes passedwithout any operation, the standbymode automatically will be set. Inthe standby mode, [;] blinks and ittakes time more than usual to startrecording after you press therecording start/stop button.[5 MINUTES]:When about 5 minutes passedwithout any operation, the moviecamera automatically turns off toprotect the tape or to prevent thebattery from running down. Whenyou use the movie camera, turn iton again.≥In the following cases, the power may not turnoff even when set [POWER SAVE] >>[5 MINUTES].≥When connecting to the AC outlet(When using the AC adaptor)≥When connecting the USB cable or the DVcable to a personal computer or otherequipment≥When the PC Connection ModeMenus related to playbackª [REC DATA]Set to [ON] and the settings (shutter speed, iris/gain values, and white balance settings (-36-),etc.) used during the recordings are displayedduring playback.≥If the [AUTO/MANUAL/FOCUS] switch was setto [AUTO] when recording, [AUTO] appears onthe display.≥When there is no data, [---] appears on thedisplay.≥If data recorded on this unit is played back onother equipment (or a tape recorded on otherequipment is played back on this unit), thesettings information is sometimes not displayednormally.ª [AUDIO OUT]This switches the sound to be played back.[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)