Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 39 page image

Playback mode39VQT1A47Playback modePlaying back tape≥Set to Tape Playback Mode.(An operation icon automatically appears onthe LCD monitor.)1 Operate with joystick.1/;: Playback/Pause6: Rewind/Review playback (Reverts toplayback with the 1/; icon.)5: Fast forward/Cue playback (Reverts toplayback with the 1/; icon.)∫: Stop≥The power will not turn off when the LCDmonitor and the viewfinder are closed andretracted during Tape/Card playback mode.≥During cue/review playback, fast-movingimages may show noise as a mosaic.≥Before and after cue/review playback, thescreen may become black for a moment orimages may be disturbed.ª To adjust volumeAdjust the speaker volume for playback.1 Move the [j /VOLi] lever to adjust thevolume.Towards [i]: increases the volumeTowards [j]: decreases the volume(Nearer the bar to [i], larger the volume.)≥On the remote control, press the [T] button toincrease the volume or the [W] button todecrease it.≥When the adjustment is completed, the volumeindication will disappear.≥If you do not hear the sound, check the settingsof [SETUP] >> [12bit AUDIO].ª Repeat playbackWhen the tape end is reached, the tape will berewound and played back again.1 Set [ADVANCED] >> [REPEAT PLAY] >>[ON].≥The [ ] indication appears. (In order tocancel the repeat playback mode, set[REPEAT PLAY] >> [OFF] or turn off thepower.)≥When you set [USB FUNCTION] >> [WEBCAM]and then connect the USB cable, the repeatplayback mode is cancelled.ª Settings on the audio≥If you cannot listen to the desired audio whenplaying back a tape, check the settings in[SETUP] >> [12bit AUDIO].≥When you record and dub the audio in [12bit]and set [SETUP] >> [12bit AUDIO] >> [MIX], theaudio will be played back in stereo soundregardless of the settings in [AUDIO OUT].VOL