Edit mode46VQT1A477 Move the joystick down to select the [∫]icon to stop playback. (Player)≥If you record (dub) images onto another videodevice and then play them back on a wide-screen TV, the images may be stretchedvertically. In this case, refer to the operatinginstructions for the device that you are recording(dubbing) to or read the operating instructionsfor the TV and set to 16:9 (full).≥For more information, refer to the operatinginstructions for your TV set and recorder.≥When you do not need functional indications ordate and time indication, respectively set[SETUP] >> [DISPLAY] >> [OFF] or set [BASIC]>> [DATE/TIME] >> [OFF] in the Tape PlaybackMode.(When you connect the movie camera and arecorder with the DV cable, these indicationsmay not appear.)ª When neither image nor sound fromthe movie camera is output to the TVset≥Check that the plugs are inserted as far as theygo.≥Check the [12bit AUDIO] settings. (-47-)≥Check the connected terminal.Using the DV Cable for Recording(Digital Dubbing)By connecting other digital video equipment withDV terminal and the movie camera by using theDV cable VW-CD1E (optional) 1, high-image-quality dubbing can be done in digital format.This model cannot be used as a Recorder.≥Set to Tape Playback Mode.(Player/recorder)1 Connect the movie camera and digital videoequipment with the DV cable.2 Start playback. (Player)3 Start recording. (Recorder)4 Stop playback. (Player)≥Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.≥Even if you use a device equipped with DVterminals such as IEEE1394, you may not beable to perform digital dubbing in some cases.For more information, see the instructions forequipment connected.≥Regardless of the menu settings on therecorder, digital dubbing is carried out in thesame mode as the [AUDIO REC] mode of theplayback tape.≥The images on the recorder monitor may bedisturbed, but it does not affect the recordedimages.1