Before Use-50-prevention slider (by sliding it to the [REC] arrowdirection).≥For other notes concerning this item, see -76-.Turning on the Movie Cameraª How to Turn on the Power1 Set the [OFF/ON] Switch (42) to [ON] whilepressing the button 1.≥The [POWER] Lamp (43) lights up.ª How to Turn off the Power1 Set the [OFF/ON] Switch (42) to [OFF] whilepressing the button 1.Selecting ModesYou can choose a desired mode by rotating theMode Dial.1 Rotate the Mode Dial (39).:Tape Recording ModeUse this mode when recording pictures on a tape.:Tape Playback ModeUse this mode when playing back the recordedscene on a tape.Using the Viewfinder/LCD Monitorª Using the ViewfinderBefore using the Viewfinder, adjust the field ofview so that the displays inside the Viewfinderbecome clear and easy to read.R E CSAVE1ONOFF(42)(43)1ONOFF(42) 1(39)1 Pull the Viewfinder.2 Adjust by turning the Eyepiece CorrectorKnob (34).To Use the Viewfinder at the Same Time as theLCD MonitorSet [LCD/EVF] >> [EVF ON/AUTO] >> [ON].≥The Viewfinder does not turn off even if the LCDMonitor is opened.≥When you turn the Movie Camera off, thissetting is cancelled.ª Using the LCD MonitorWith the LCD Monitor open, you can also recordthe picture while watching it.1 Put a finger on the [OPEN4] Knob (1) andpull the LCD Monitor (2) out in the directionof the arrow.≥The Viewfinder is deactivated.≥The LCD Monitor can be opened a maximumof 120o. If you open the LCD monitor by 120o,it becomes convenient to operate menus or toplay back pictures.2 Adjust the LCD Monitor angle according tothe desired recording angle.≥The LCD Monitor can rotate a maximum of180o 1 from the vertical position upwardsand a maximum of 90o 2 to the downwarddirection. Forcefully rotating the LCD Monitorbeyond these ranges will damage the MovieCamera.12:30:4515.10.200412:30:4515.10.200412:30:4515.10.200412:30:4515.10.2004(34)(2)(1)290o1180o