Panasonic NV-GS60GC Operating Instructions Manual

Also see for NV-GS60GC: Service manual

Contents

Record mode67LSQT1135Blank search functionSearches for the last part of the image recorded(unused part of the tape). After the search isfinished, the blank search function is cancelledand the camera is put into recording pause.≥Set to Tape Recording Mode.1 Press the joystick to display the icon duringthe recording pause. Move the joystickdown until icon 1appears.2 Move the joystick right to select the blanksearch icon [ ].3 When the confirmation message appears,select [YES] and press the centre of thejoystick.ªStopping blank search midwaythroughMove the joystick down to select the [∫] icon.≥If the cassette tape has no blank part, then thecamera will stop at the end of the tape.≥The camera stops at a point approx. 1 secondbefore the end of the last image recorded.When you start recording at that point, theimage can be recorded seamlessly from the lastimage.Recording a still picture on a tape(Photoshot)Still pictures can be recorded from the moviecamera lens.≥Set to Tape Recording Mode.1 Press the [ ] button in the recording pausemode.≥The movie camera records a still picture forabout 7 seconds and then switches back tothe recording pause mode.≥If you set [ADVANCED] >> [SHTR EFFECT] >>[ON], you can add image and a sound likereleasing the shutter.≥Photoshot recording results in slightly inferiorimage quality.ªContinuous photoshotIf you set [ADVANCED] >> [SHTR EFFECT] >>[ON] and keep the [ ] button pressed, the moviecamera will continuously record still pictures inapprox. 0.7 seconds intervals until the button isreleased.≥The screen blinks and, at the same time, ashutter clicking sound is recorded.1LSQT1135ENG.book 67 ページ２００６年１２月２２日金曜日午後１０時２分