Panasonic NV-MX500B Operating Instructions Manual

Also see for NV-MX500B: Operation instruction Service manual Operating instructions

Contents

Before Use-11-1 Press the [MENU] Button (51).≥The Menu corresponding to the Mode selected by usingthe [OFF/ON/MODE] Switch (33) is displayed.2 Turn the [PUSH] Dial (26) to select a desiredSub-Menu.≥Turn the [PUSH] Dial (26) to display the highlighteneditem.3 Press the [PUSH] Dial (26) to display the selectedSub-Menu.4 Turn the [PUSH] Dial (26) to select the item to be set.5 Press the [PUSH] Dial (26) to set the selected item to adesired mode.≥With each press of the [PUSH] Dial, the cursor [1]moves to the next mode. Menu items that cannot beused in combination with the selected item are displayedin dark blue.≥While a Menu is displayed, you cannot record or play back.Menus can be displayed during playback but not duringrecording. The above operations can be done using the[MENU] Button, [SET] Button and [ITEM] Button on theRemote Controller. (-6-)To Exit the Menu ScreenPress the [MENU] Button again.About the Menu Mode SettingThe setting selected on the Menu will be retained even whenthe Movie Camera is turned off. However, if the Battery orAC Adaptor is disconnected before turning off the MovieCamera, the selected setup may not be retained. (But, thesetups of [EFFECT2] (-23-) are not retained.)≥Menu operation flow is shown in this text by >>.ª File Selection in the Card Playback ModeA File Selection Operation may be necessary during MenuOperations. In this case, carry out the following procedure.1 Turn the [PUSH] Dial (26) and select a file.≥The selected file is marked by a frame.2 Press the [PUSH] Dial (26) to confirm the selection ofthe file.≥After the above File Selection Procedure, carry out thevarious Menu Operations. (The above procedure will not berepeated in the following instructions.)List of MenusThe figures of the Menus are for explanation purposes only,and they are different from the actual Menus.M ENUPUSHSHUTTER/IRIS/VOL/JOG(26)(51)(33)OFFONMODEPICTURENo.25 100-0012ª [CAMERA FUNCTIONS]Camera Mode Main-Menu1) [CAMERA SETUP]Camera Setup Sub-Menu[PROG.AE]Auto Exposure Mode -18-[PROGRESSIVE]Progressive Photoshot Mode -16-[D.ZOOM]Digital Zoom -17-[CINEMA]Cinema-like Format Recording -18-[REC MODE]Recording Mode -16-[ASPECT]Wide Mode -18-[RETURN]Returning to the Main-Menu≥If you set [RETURN] to [YES], the menu changes back tothe Main-Menu.2) [ADVANCED FUNCTIONS]Advanced Functions Sub-Menu[ZEBRA]Zebra Pattern -21-[MIC LEVEL ADJ.]Microphones Sensitivity Level -21-[PICTURE ADJ.]Picture Adjustment -22-[COLOUR BAR]Colour Bar -22-3) [DIGITAL EFFECT]Digital Effect Functions Sub-Menu[EFFECT1]Digital Effects 1 -22-[EFFECT2]Digital Effects 2 -23-4) [CARD SETUP]Card Setup Sub-Menu[PICTURE SIZE]Picture Size -32-[PICTURE QUALITY]Picture Quality -32-[MPEG4 MODE]MPEG4 Picture Quality -33-[LOW LIGHT SHOT]Card Low Brightness -31-[CREATE TITLE]Title Creation -36-5) [MULTI-PICTURES]Multi-Picture Mode Sub-Menu[SCAN MODE]Multi-Picture Mode -24-[SPEED]Strobe Multi-Picture Speed -24-[SWING]Swing Mode -24-[P-IN-P]Position of Small Picture inside Normal Picture -23-6) [RECORDING SETUP]Recording Setup Sub-Menu[REC SPEED]Recording Speed Mode -14-CAMERA FUNCTIONSPRESS MENU TO EXIT1.CAMERA SETUP2.ADVANCED FUNCTIONS3.DIGITAL EFFECT4.CARD SETUP6.RECORDING SETUP7.DISPLAY SETUP8.OTHER FUNCTIONS9.DEMO MODE5.MULTI-PICTURES

/ 11

Related manuals for Panasonic NV-MX500B