Playback“onmto""S) ED<4 TRACKING P EC30 EC45 SP’LPPreparation®lnsert the recorded cassette.@Press the centre part of the Operation Switch and slide it to the“VTR” position.Operations1° Playback: Press the Play Button.2 Cue playback: Keep the FF/(-3) Button pressed duringplayback.3 Review playback: Keep the @=/REW Button pressed duringplayback.4 Still playback: Press the Pause Button during playback.@To return to normal playback, press this button again.5 Press the Stop Button to finish playback.Fast ForwardPress the FF/] Button to rapidly wind the tape forward.RewindPress the (=/REW Button to rapidly rewind the tape. -31-Tracking ControlWhen Picture is distorted by noise bars during playback, theTracking needs to adjusted.SHIFT _.DATE; SETOmeOQ<4 TRACKING P1 Press both the Tracking < and > Buttons simultaneously.2 Adjust the Tracking with the Tracking <4 or ® Button.eWhen playing back a tape which has been recorded on anothermovie camera, it may not be possible to completely eliminate thisdistortion.@Noise which takes the form of horizontal bars appears in the Cue,Review and Still playback modes. This is not an indication of amalfunction.eln the Cue, Review and Still modes, the picture may becomeblack and white or distorted. This is not an indication of amalfunction.Note:©The sound will be played back only during normal playback.ePlayback: The tape will be rewound automatically when itreaches its end.Fast Forward: The tape will be rewound automatically when itreaches its end.Rewind: The tape will stop automatically when it reaches itsbeginning.Still Playback: If the Movie Camera is left in this mode for about6 minutes, it will switch over to the stop mode, to protect the tapeand video heads.