Panasonic NV-VP60 Series Operating Instructions Manual

Also see for NV-VP60 Series: Operating instructions

Getting StartedRQTV0115 11 11Operating the TVTurn on the TV.(1) TV Power button (Í)≥Switch the TV from on to standby mode or vice versa.On some TVs, with this button it is only possible to turn it tostandby mode (OFF). In this case, try to turn the TV on with thefollowing button:[JICH] (4)(2) TV Input Mode Selector button (AV)≥To select the desired AV input on the TV.(3) TV Volume Up/Down buttons (sNrVOLUME)≥To adjust the volume of the TV.(4) TV Channel Up/Down buttons (IJCH)≥To select the desired programme position (TV station) on theTV.You can operate the TVs of the manufacturers listed below with theremote control after setting it..........................................................................................................................................................................................................................[1] Refer to the chart below for the code of your TV..........................................................................................................................................................................................................................[2] Aim the remote control at the TV.While pressing [Í] (1), use the numericbuttons to enter the two-digit code.Example: “1”; [0]l[1].........................................................................................................................................................................................................................[3] Check whether the TV can be operatedproperly.≥Test by turning on the TV and changing channels. Repeat theprocedure until you find the code that allows correct operation.≥When a manufacturer has multiple codes in the following chart,try entering other codes if the TV operations cannot beperformed properly, and then select the optimal code.Notes:≥If you are using a Panasonic TV, this setting has already beenmade, you do not need to perform the above procedure. However,this remote control may not work on some Panasonic TVs.≥Some TV models cannot be operated by this remote control(including all TVs non-remote compatible).TV OPERATIONNumericButtons(4)(3)(2)(1)TV Maker SettingBrand CodePanasonic/National 01-04SONY 05TOSHIBA 06JVC 07HITACHI 08MITSUBISHI 09, 10SHARP 11PHILIPS, SAMSUNG 12NEC 13SANYO 14GOLDSTAR/LG 15, 16SAMSUNG 17, 18SANYO 19