Panasonic NV-VP60 Series Operating Instructions Manual

Also see for NV-VP60 Series: Operating instructions

RQTV0115 21Settings Using the On-Screen DisplayVHS Operations21.........................................................................................................................................................................................................................[1] Press [34] to select “CH” and then press[2 1] to select the channel..........................................................................................................................................................................................................................[2] Press [34] to select “FINE” and then press[2 1] to obtain the best tuning condition.≥Press [ENTER] to return the tuning to its former state..........................................................................................................................................................................................................................[3] Press [MENU] until the setting screendisappears.Set the Colour TV System..........................................................................................................................................................................................................................[1] Press [34] to select“AUTO”.≥The VHS automaticallydistinguishes between PAL,SECAM/MESECAM andNTSC signals. If the picturelacks colour during AVexternal recording,playback or recording fromDVD to VHS, set to “PAL”, “MESECAM” or “NTSC”.≥When you want to record or playback in black and white, set to“B/W”..........................................................................................................................................................................................................................[2] Press [MENU] repeatedly until the settingscreen disappears.Press [34] to select the item and then press[2 1] to change the setting.¬ To exit the settings screenPress [MENU] twice.Fine TuningSystemOptionSYSTEMAUTOPALMESECAMNTSCSELECT :END : MENUCOPYING NORMAL AUDIOSELECT : :TAPE SELECTOPTIONNTSC INPUT SELECTNTSC PB SELECTOSDItemsSettings (Underlined items are the initial setting.)TAPE SELECTSet the length of tape you are using so the unit can show thecorrect remaining time (l 22)AUTO: E30, E60, E90, E120, E180 and E240 tapesE195: E195 tapesE260: E260 tapesE300: E300 tapesNTSC INPUT SELECTSelect the colour TV system used to record NTSC signalsAUTO: NTSC [4.43] and [3.58] signals≥If the tape has not recorded correctly, select 4.43 or 3.58.4. 43: NTSC 4.43 signals3. 58: NTSC 3.58 signals≥Some programmes on the NTSC 3.58 system cannot berecorded.NTSC PB SELECTSelect the colour TV system of the TV used to playback a taperecording NTSC signalsonPALTV: TVs that can receive PAL signals4. 43: TVs that can receive NTSC 4.43 signals3. 58: TVs that can receive NTSC 3.58 signalsOSD (l 22)AUTO: Messages appear on the TV for about 5 secondswhen you press [VHS STATUS].OFF: Messages do not appear.COPYING NORMAL AUDIO (l 38)Select the audio channel to be recorded on the Normal audiotrack when copying a bilingual DVDL: To record the sound from left channelR: To record the sound from right channel