Panasonic NV-VP60GL Service Manual

Also see for NV-VP60GC: Operating instructions Service manual

Contents

9.2. Service Mode Table 1The service modes can be activated by pressing various button combination on the player and remote control unit.Player buttons Remote control unit buttons Application NotePLAY (DVD)+OPEN/CLOSE0 Displaying the UHF display F_ _ _ Refer to section 9.3. Self-Diagnosis Function (UHFDisplay).5 Jitter check, tilt adjustment*Display shows Jxxx/__yyNote: By pressing “VHS STATUS“ button on the remote control,Display contens can be changed."yy" shown to the right have nothing to do with the jitter value."yy" is the focus drive value.Refer to section 11.4. for Optical Pickup Tilt AdjustmentProcedure.Refer to section 11.4.Optical Pickup TiltAdjustment6 Checking the region numbers and broadcast system7 Checking the program version Check the IC8651 FLASHROM program.9 Lighting Confirmation Function of Display TubeDISPLAY Checking the laser drive current Refer to Optical PickupReplacement Procedure.PAUSE Writing the laser drive current value after replacing the opticalpickup (do not use for anything other than optical pickupreplacement)PLAY (DVD)+ REW+OPEN/CLOSE-----------Initializing the DVD player(restoring factory preset settings)Refer to section 9.5.Initializing the DVDplayer.9.3. DVD Self Diagnostic Function-Error CodeError Code Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4U, H errorU11 Focus errorU15 Non finalized DVD-Rdisc playback errorH01 Tray loading errorH02 Spindle servo error (Spindle servo, DV3.2 (IC8001) SP motor, CLVservo error)H03 Traverse servo errorH04 Tracking servo errorH05 Seek errorH06 Power error Cannot switch off the power because of the paneland system computer communication errorH07 Spindle motor driveerrorSpindlemotor ass’yDSC relatedF500 DSC error DV3.2 (IC8001) stops in the occurence of servoerror (starup, focus error, etc)OpticalpickupDV3.2(IC8001)servo driveF501 DSC not Ready DSC-system computer communication error(Communication failure caused by idling of DSC)DV3.2(IC8001)F502 DSC Time out error Similar disposal as F500 OpticalpickupDV3.2(IC8001)servo driveF503 DSC communicationFailureCommunication error (result error occuredalthough communication command was sent)DV3.2(IC8001)F505 DSC Attention error Similar disposal as F500 OpticalpickupDV3.2(IC8001)servo driveF506 Invalid media Disc is flipped over, TOC unreadable,incompatible discDISC DV3.2(IC8001)ODC relatedF600 Access failure tomanagementinformation caused bydemodulation errorOperation stopped because navigation data is notaccessible caused by the demodulation defectDV3.2(IC8001)F601 Indeterminate sector IDrequestedOperation stopped caused by the request toaccess abnormal ID dataDV3.2(IC8001)F602 Access failure to LEAD-IN caused bydemodulation errorLEAD IN data unreadableF603 Access failure toKEYDET caused bydemodulation errorAccess failure to CSS data of disc34NV-VP60GL / NV-VP60GC / NV-VP60GCS