Activating P2 Streaming Server SoftwareYou must activate registration prior to start using P2SS software. Please follow below steps:Network RequirementsRouting Requirements:1. When using P2Cast to enable stream from P2 Camera, P2SS must be connected to Global IP Network. P2SS usesfollowing local UDP ports when streaming:local ports: UDP: 50000-50006, 50020-50026, 50040-50046 & 50060-500662. P2SS requires access for STUN Server:• Ensure P2SS can access 104.45.140.135 and 104.45.9.228 IP address.• Ensure P2SS can access UDP port 3478 & 3479Simple Port Tester , Application shortcut available on desktop can help test if above mentioned ports are opencorrectly. For more information on the Simple Port Tester, Please visit http://www.pcwintech.com/simple-port-testerP2 CameraAJ-PX270, AJ-PX5000,AJ-PX380, AJ-PX800,AJ-PG50PTZ CameraAW-HE130, AW-UE70, AW-HE404G/LTEWireless LANAJ-WM50Wired LANWired LAN InternetorLocal NetworkVGA1. Connect P2SS hardware to the Internet.2. Run PActivationManager.exe from Activation folder ondesktop.3. When you start the activation program for the first time,a screen for registration appears, Enter the Informationin each item, and than click Apply button.4. Window of the activation program is displayed.5. Select the Model No SK001 column, and than click theActivation button.6. The key code input screen appears, Enter the P2SSActivation key code that is supplied with the hardware inthe key code input field.7. Click OK, Software is now activated.Note: After carefully reading and agreeing with the Software LicenseAgreement, activate the Software according to the procedure described in theSoftware License Agreement. If you activate the Software, you are consideredto have agreed with the terms of the Software License Agreement.