Panasonic PLC-XF60A Owner's Manual

Contents

Panasonic PLC-XF60A Owner's Manual Manual pdf 44 page image

12Decrease or increase contrast with the Point buttons (e and d)or the Control pad. (From 0 to 63.)Adjust image darker or brighter with the Point buttons (e and d)or the Control pad. (From 0 to 63.)ContrastBrightnessLighten or deeper color with the Point buttons (e and d) or theControl pad. (From 0 to 63.)Adjust with the Point buttons (e and d) or the Control pad toobtain proper color. (From 0 to 63.)ColorTintImage AdjustImage Adjust MenuColor managementThe Color management function enables you to adjust colorlevel, phase and gamma of the selected spot of the projectedimage and exchange the original color with the adjusted one.The projector can store up to eight color management data.adjusts Contrast, Brightness, Color, Tint, Color management, Auto picturecontrol, Color temp., Red, Green, Blue, Sharpness, Gamma, Noise reduction,Progressive, and Film; selects Reset and Store.Pointer(yellow frame)Move the yellow framepointer with the Pointbuttons (e and d) orthe Control pad to anitem which you want toadjust.Indicates the otheritems exists below.Item dataAdjust value with thePoint buttons (e andd) or the Control pad.44Press the MENU button to display On-Screen Menu. SpinMenu icons with the Point buttons (7 and 8) or the Controlpad and press the SELECT button when the IMAGE ADJ.icon comes right in front.Move the yellow frame pointer with the Point buttons (eand d) or the Control pad to an item which you want toadjust.Press the SELECT button to display an adjustment dialogbox. Adjust value with the Point buttons (e and d) or theControl pad.3IMAGE ADJ. icon✔Note:• Color and Tint cannot be displayed when PC input source is selected.• Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N.(p.39)Color selectionPress the SELECT button when Color management ishighlighted and then Color management pointer will appear.Move the pointer to a spot which you want to adjust the colorof with the Point buttons (e, d, 7, and 8) or the Control pad,and press the SELECT button. The image being projectedfreezes and Color Selection window will appear.X-axis of COLOR pallet shows Phase and Y-axis, Level.Select a level and phase which you prefer with the Pointbuttons (e, d, 7, and 8) or the Control pad and press theSELECT button to move the pointer to GAMMA.Select a position of GAMMA which you prefer with the Pointbuttons (e and d) or the Control pad and press the SELECTbutton.While adjusting COLOR and GAMMA, the projected imagecolor will change accordingly.Color management pointerMove the pointer to a spot which youwant to adjust the color of and thenpress the SELECT button. ColorSelection window will appear asshown below.Color selectionPointer(red frame)Image Adjustment