Panasonic PLC-XF60A Owner's Manual

Contents

Panasonic PLC-XF60A Owner's Manual Manual pdf 6 page image

6Safety InstructionsOpenings in the cabinet are provided for ventilation and toensure reliable operation of the product and to protect it fromoverheating, and these openings must not be blocked orcovered.CAUTIONHot air is exhausted from the exhaust vent. When using orinstalling the projector, the following precautions should betaken.– Do not put any flammable objects or spray can near theprojector. Hot air is exhausted from ventilation holes.– Keep the exhaust vent at least 3.3’ (1m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic part. This area will becomehot while the projector is being used.– Do not put anything on the cabinet. The materials put onthe cabinet will not only get damaged but also cause firehazard by heat.Cooling fans are provided to cool down the projector. Thefan's running speed is chaged according to the temperatureinside the projector.Air Intake VentExhaust Vent(Hot air exhaust)Do not tilt the projector more than 20degrees from side to side.In upward projection, do not tilt theprojector over 20 degrees right andleft.Do not put the projector on either sideto project an image.20˚20˚In downward projection, do not tilt theprojector over 20 degrees right andleft.Use the projector properly in specified positions. Improperpositioning may reduce the lamp life and result in severeaccident or fire hazard.This projector is allowed to project the picture in any positionof 360 degrees such as upward, downward, or backward asbelow.BottomDownward(Usual)FrontDownwardBottomUpwardFrontUpwardSetup In Proper DirectionsWhen installing the projector, avoid positioning it as describedbelow:Positioning PrecautionsAir Circulation