Panasonic PP104286 Operating Instructions Manual

Panasonic PP104286 Operating Instructions Manual Manual pdf 10 page image

10One-Hour TimerWith the ignition off, pressing the [PWR] on thisunit will turn on the receiver and activate thereceiver's one-hour timer. The receiver will turn offautomatically after one hour.GeneralPowerTurn the key in the ignition until the accessoryindicator lights.Power on: Press [PWR] (Power).Power off: Hold down [PWR] for more than 1second.Volume level (0 to 40)(default:18)VolumeTurn [VOL] (Volume) clockwise to increasevolume, and counterclockwise to decrease vol-ume. UpDownSource selectionThe source changes as follows every time[SRC] (Source) is pressed.AUX2 setting1 Hold down [ALM] (Alarm) for more than 2 seconds.The alarm time appears.2 Press [BAND] to activate the AUX2 setting mode.“AUX2 OFF” (default) or “AUX2 ON” appears.(Depending on the last time displayed of detec-tion setting)3 Rotate [VOL] to select a setting.AUX2 ON: AUX2 detectableAUX2 OFF: AUX2 undetectable4 Press [SEL] (Select) at “AUX2 ON” se-lected in the setting above.“AUX2 LOW” (default) or “AUX2 HI” appears. (De-pending on activity level setting for the last time)¡When activating level of an output from the rearAUX terminal is detected, the source automaticallychanges to AUX2. If this output is no longer de-tected, pre-AUX2 source instantly resumes.¡When activating level of an output from the rearAUX terminal is detected at power off, the power isturned on with the AUX2 selected. If this output isno longer detected before manually selecting othersources, the power is turned off.5 Rotate [VOL] to select activity level.Select “AUX2 LOW” or “AUX2 HI” according toactivity level of the device connected to the rearAUX terminal.RadioFM, AM, WB(a page 12)Disc playerCD, MP3/WMA(a page 14)USBMP3/WMA(a page 16)AUX1Connected to thefront AUX terminalAUX2Connected to therear AUX terminalMutePress [MUTE] to mute the sound completely.Press [MUTE] again to cancel.Note: To exit theAUX settingmode, press[DISP].[BAND][ALM] / [SEL]̲