Panasonic PP104286 Operating Instructions Manual

Panasonic PP104286 Operating Instructions Manual Manual pdf 20 page image

20[ALM][d] / [s]Alarm SettingAlarm time setting1 Hold down [ALM] (Alarm) for more than 2seconds.(Alarm time display)“ALM ADJ” is displayed when the alarm time isnot adjusted.2 Hold down [ALM] for more than 2 secondsafter the above display is shown.Hour blinks3 Adjust the hour.[d] : Sets ahead.[s] : Sets back.Hour entered4 Push [ALM].Minute blinks5 Adjust the minute.[d] : Sets ahead.[s] : Sets back.Minute entered6 Push [ALM] to complete.CompletedThe alarm is set to ON automatically after com-plete alarm time setting.Alarm indicator ( ) lights.Notes:¡When the clock (a page 9) is not set, performand complete the alarm time setting, the clocktime will set to “PM 1:00” automatically. Pleasereadjust the clock time depending on the actualclock time.¡Hold down [d] or [s] to change numbers rapidly.¡When you want to readjust the alarm time, repeatsteps 1 to 6.Turning ON/OFF the alarm1 Hold down [ALM] for more than 2 seconds.(Alarm time display)2 Push [ALM].(Alarm ON/OFF setting)3 Turn [ALM] clockwise or counterclockwise toselect alarm ON or OFF, then push [ALM]again to confirm the setting.(Select alarm ON, lights.)Notes:¡Before turn ON the alarm, make sure the alarmtime is set. Failure to heed this will cause invalidselection of alarm ON.¡Hold down [ALM] for more than 2 seconds whenthe alarm is sounding also turns off the alarm.¡Access of alarm ON/OFF is available by push[ALM] in the “Alarm time display”.Activating snoozePress any button on this unit when the alarm issounding.The alarm will sound again in 9 minutes.Notes:¡If you do not turn the alarm off when the alarm issounding, the alarm sound will shut off after anhour. (including the amount of time the alarm waspostponed (snooze))̲