14Use this configuration when connecting the projection display to a cable TV system using VCR.Notes:• When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set theTV channel to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT.InstallationConnecting the Antenna / Cable to the RF in Terminal (VCR)Connect the cable from the Output terminal on the backof the Cable Box or antenna/cable system to theAntenna input terminal on the back of the VCR.CABLE BOXTO VCROUTPUTS-VIDEO VIDEO L-AUDIO-RTO VCRINPUT OUTPUTOUTPUT INPUTVCRTERMINAL ONTHE BACK OFTHE CABLE BOXIn from cableIncoming Cable fromAntenna or Cable TVSystemOr
