33Basic OperationPlaying peripheral equipmentVCRDVD playerThis equipment can also beconnected to the rear terminals.See Connections for details.Turning the power on and switching input modesTurn the projectiondisplay on.12 The input modechanges each timethis button is pressed.* No input mode isdisplayed for terminalswith no equipmentconnected.3 Operate the connected equipment.Confirming connectionsA video camera uses the Input 3 terminal on the front of the projection display.Video cameraTo S-video outputor video outputTo audio outputLINE 1:Signal of source connected to INPUT 1 is displayed.LINE 2:Signal of source connected to INPUT 2 is displayed.LINE 3:Signal of source connected to INPUT 3 is displayed.COMPONENT 1:Signal of source connected to COMPONENT VIDEO INPUT 1 is displayed.COMPONENT 2:Signal of source connected to COMPONENT VIDEO INPUT 2 is displayed.RGB:Signal of source connected to PC IN is displayed.TVLINE 1LINE 2LINE 3RGBCOMPONENT 2COMPONENT 1*****Example: Connect Input 3
