Panasonic PT-43LC14 Operating Instructions Manual

Also see for PT-50LC14 - 50" Rear Projection TV: Lamp replacement update Operating instructions User guide

Contents

InstallationProcedureConnect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.• If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminalsetting, use the Component Video input (or the S-Video Input or Video Input). In this case, the picture will bedisplayed as an analog signal.Press TV/VIDEO on the Remote Control to select HDMI input.By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminal ofthis Device Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is foruse in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)Notes:* Select the HDM! input position by pressing the TV/VIDEO button. (R 35), The HDMI IN terminal can only be used with 1080i, 720p and 480p picture signals., If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.Compatible formatsVideo Signal:The Device display is compatible with following formats. Please set the connecting device to following format.Display mode1080i720p480pNo. ofdots1920 x 1080i1280x 720p720x480p640 x480pVerticalscanningfrequency(Hz)59.94/6059.94/6059.94/6059.94/60Audio signa_ (PCM)Please see "AUDIO SELECT" on page 43.21