Panasonic PT-51G46C Operating Instructions Manual

Also see for PT-51G46: Operating instructions

Contents

Strike PlateMust beLocated onInside Surfaceof Glass Door,Flush withTop Edgeand VerticalEdge of Glass(Step 2)\Hinge Plate Positioned Flush with Inside CornerInside Surface of GlassEdges of Glass Door(stepOn2) \ _-..__fJlLeft Glass Door __l.JStrikePlate Hinge PlateLeft Glass DoorJHinge Plates Must be/Placed on Inside ---_Surface of Glass and '_Flush with CornerEdges(Step 1)Hinge Plate(Step 1)Cabinet Side (Left)Upper DoorHinge(Step 3)Insert PhillipsHead Screws(Step 4)Slide Doorsinto Hinges(Step 5)Cabinet Glass DoorInstallation InstructionsFor PT-61G46 Models1. Affix two (2', hinge plates 1:othe insidesurface of each glass door byremoving paper backing _nd place asshown..._ Right Glass Door with_ Hinge Plates & Strike_ PI _te Attached\Strike Plate Must beLocated on InsideSurface of Glass Door,Flush with Top Edgeand VerticalEdge of Glass(Step 2)°,,,.Remove paper backing from strike plateand position it flush with top edge andflush with vertical edge of both left andright inside surface of glass doors asshown.Open glass door hinges parallel to cabinetsides.Take eight (8) Phillips head screws fromplastic bag, insert them (2 per hinge)and tighten j Jst enough to hold screwsin place. (Do not tighten all the way).Carefully slide one of the glass doors intoupper and lower door hinges as shown.Left Glass Door WithHardware Affixed- 38-

/ 38

Related manuals for Panasonic PT-51G46