Panasonic PT 56DLX76 Operating Instructions Manual

Panasonic PT 56DLX76 Operating Instructions Manual Manual pdf 26 page image

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo26Always be sure to follow the procedure given below toturn the Projection Display power ON and OFF.• The lamp cooling fan will continue to operate forapproximately 1 minute after the power is turned off. Duringthis time, the POWER indicator will blink Red.Press POWER on Projection Display or Remote Controlto turn power on.The Power Indicator blinks Green for about 15 secondsand then turns solid Green.The Power IndicatorNotes:• If the POWER button is accidentally turned off during use,after power is turned back on, it may take a short periodbefore the lamp automatically comes on.• After the unit is turned on, maximum picture brightness andcolor will be achieved in 5-10 minutes. During this time,brightness and color levels may change. This is normal.• This unit consumes approx. 0.5 W (13 W when CableCARD™is inserted.) in OFF condition when plugged into an AC outlet.Press POWER on Projection Display or Remote Controlto turn power off.Note:• When the power cord is disconnected, the internal coolingfan stops operating. In this case, the lamp will be insufficientlycooled and will take a while to turn ON again.Power ONPower OFFThe Power Indicator blinks Red for about 1 minute andthen LED turns off.Turning the Power ON and OFFLED ACTIONOff Power – OFFRed (blinking) Power – OFF (Now cooling)Green Power – ONGreen (blinking) Power – ON (Preparing to light lamp)Power shuts off after a Black Screen is displayed for afew seconds.Note:• If the POWER button is pressed during the Black Screendisplay, Power is turned back on.Do not disconnect the power cord from the outletand do not open the circuit breaker (unlessnecessary) while the cooling fan is still operating. Donot disconnect the power cord from the power outletwhile the power indicator blinks Red.Power ON / OFFAuto shut offTo conserve lamp life, if there is no signal to theset’s tuner for 5 minutes, the lamp will shut offautomatically.POWER button/POWER indicator