Panasonic PT-56TWD63 Operating Manual

Also see for PT47WXD63G - 47" PROJECTION TV: Service manual Service manual

Contents

Panasonic PT-56TWD63 Operating Manual Manual pdf 25 page image

M ENU OPERATIONS23 zENGLISHPhoto Viewer™ Operations (Cont.)Photo Viewer™ Setup MenuThis menu allows you to customize features in the PhotoViewer™ Setup menu.Procedure• Highlight Photo Viewer™ icon and press OK button todisplay the thumbnail screen.• Press the SD button on the remote control to display theSetup screen.• Use the CHTS, W VOL or VOL X keys to navigate inthe setup menu. Slide Show - Allows you to start the slide show by pressingthe OK button while Start is highlighted. Press OK button tostop the Slide Show.Note: When you are in the Slide Show mode, you can changethe Aspect of the image on screen by pressing theASPECT button on the remote control. Interval - Allows you to change the length of time that a slideis being displayed on screen. Available settings are: 5sec,10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes. Sequence - Select either Order or Random. Repeat - Select Off or On.Note: After setting Interval, Sequence or Repeat, press CH Sbutton to select Start, then press OK to start the SlideShow. Rotate - Allows you to rotate the image. Zoom - Lets you select the magnification of the Single Slidedisplay.Procedure• While in the Single Slide display mode, press SD buttonto display Photo Viewer™ Setup Menu. Zoom option willbe displayed in the Setup Menu.• Highlight Zoom and press OK button.• Press W VOL or VOL X button to select To Fit, x2 or x4.• Press OK button. To move the image in the pictureframe, press the navigation buttons.• Press OK to view the slide in normal magnification. Card - Select either SD or PC when both cards are inserted inthe slots.Following are some of the error messages that may be displayedon-screen when certain conditions are not met or exceeds thePhoto Viewer™ specifications.Notes:• If thumbnail screen or a single slide image is displayedfor longer than 10 minutes, Image shift (refer to page 26)feature will be activated to prevent image retention. Theimage on-screen will zoom-in and zoom-out in 4 (four)steps.To exit this mode, press OK button or selectanother slide or press any button.• During the Slide show, the Image shift feature willactivate if the image is displayed longer than 5 (five)minutes. The image will be shifted horizontally (left orright) in minute increments. Image shift feature will notactivate, if it is turned Off.Setup Menu ReturnInterval 5SecSequence OrderSlide Show StartRepeat OFFRotate LeftCard SD100-001 0001/0066STW XEXITSELECTCHANGEOK: 07/04/2002: 1600 x 2000DatePixelError messagesError condition Error messages displayedon-screenWhen inserting Card No card or Card is not insertedcorrectlyIf the JPEG file is corruptedand cannot be decoded. This type of image is not supported.If the card is not formatted withFAT 12 or FAT 16 or if it is notDCF standard.This type of format is not supported.If thumbnail and main picturecannot be shownOver 3000 image files Photo Viewer™ cannot support over3000 JPEG files.Resolution over Photo Viewer™ cannot support over8192 x 8192 pixels.If incompatible card is inserted This type of card is not supported.Photo Viewer™ TroubleshootingSymptoms SolutionsCannot read the content ofthe cardA) Not compatible format. Must beformatted with FAT 12 or FAT 16.B) The extension is not “JPG”.Photo Viewer™ can display EXIFstandard JPEG file, and JPEGfile which is not EXIF standardcannot be shown.C) The folders not under DCFstandard.PC card cannot be ejected Push the card all the way in, andeject.Poor picture qualityIf the main image cannot be read(the file is partially corrupted), thePhoto viewer™ will read thethumbnail. Please confirm theformat of the image.Long time to displayIt will take long time to display, ifthere are lots of images or if the filesize is big.This icon will appear wherethumbnail image will.