44!This unit includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) livebroadcasts at the same time with or without an external video source, such as a VCR, cable box, etc.Display PIP screenPress to split.(The previously selected screen appears on the Main.)Returning to one screenPress to return.Main screen(Main pic ture)PIP screen(Sub picture)Notes:• Sound from the Main screen is output from the speakers on the Projection Display set.• In PIP mode, the Main screen signal is output from the rear monitor output terminal.• Because Main and PIP screens are processed by individual circuits, image quality may vary slightly.• PIP mode returns to single screen when the Projection Display is turned off.• Essentially, the Main and PIP screens cannot display the same picture at the same time.• Only the Analog programming from Antenna (A) and video inputs signal can be viewed in the PIP screen function.• A component signal cannot be displayed on a PIP screen. Thus, when a component signal is displayed on the Main screen, theSWAP button becomes invalid.• When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 40-41)• When the RGB, HDMI or Card (Photo Viewer) input mode is selected, PIP feature cannot be used. (P. 37)• The signal input from Antenna (B) can be displayed on the Main screen only. (It cannot be displayed as a PIP screen.)Picture in Picture (PIP) ScreenSelect desired input mode of the PIP screenPress to select the desired inputmode.TVVideo 1*Video 2*Video 3** If SKIP is set as the InputLabel setting of ChannelCaption, the mode will notbe changed. (See page 71.)
