91InformationRemote Control Quick Reference Guide (Operating peripheral equipment)Programming The RemoteThe Universal Remote Control can be programmed to operate many manufacturers’ components, using thecomponent function buttons for VCR, DVD, DBS, RCVR or AUX. Follow the procedures for programming yourRemote Control with or without a code for the component.Setting up the remote using the numerical keys.(When code is known):1 Confirm that the external component is pluggedand operating. Turn the component off.23Press appropriate component button on theRemote Control VCR, DVD, DBS, RCVR, CBLor AUX (PVR or VCR2)Enter the 3-digit component code using theRemote Control number keys (0 ~ 9 buttons).Press the Remote Control POWER to test thecomponent. If the procedure was successful, thecomponent will turn on.Notes:• Determine the manufacturer of the component and look in the table for the code.• If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands havemultiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.+Device Operates DefaultTV TV (Panasonic Only) Panasonic CodeVCR VCR (Preset) Panasonic CodeDVD/CD DVD and CD (Preset) Panasonic CodeDBS DBS STB & CBL STB (Preset) Panasonic DBS CodeRCVR Audio Receiver (Preset) Panasonic RCVR CodeCBL Cable (Preset) Panasonic CABLE CodeAUX Personal Video Recorders,Cassette and VCR2Panasonic Personal Video RecorderCodePOWERPress OK and POWER together, for at least5 seconds.
