42-ENGLISH ENGLISH -43 Advanced OperationInserting and removing the SD memory card About the SD menuThe still image data and moving image data that is stored on SD memorycards can be played back using the SD menu.Displaying the SD menuPress the SD button to change the display to the SD CARD screen.Inserting the SDmemory cardInsert the SD memory card so that itis facing the correct way.# Open the slot cover at the sideof the projector.$ Insert the SD memory card asshown in the illustration below.Insert the SD memory card withthe label side facing upward andso that the cut-away corner isinserted first. Push the SDmemory card in as far as it willgo.NOTE:B If you try to force the SD memorycard to go in the wrong way, itmay damage the SD memorycard and the card slot.% Close the slot cover.Removing the SDmemory card# Open the slot cover.$ Check that the access indicatorat the upper-left corner of thecard slot is not flashing (the SDmemory card is not beingaccessed).NOTE:B Always be sure to check that theaccess indicator is not flashingbefore removing the SD memorycard. If the SD memory card isremoved while the accessindicator is flashing, the datastored on the SD memory cardmay become corrupted.% Push in the middle of the SDmemory card. (The SD memorycard will protrude slightly.)& Remove the card.' Close the slot cover.Access lampPICTURE (page 44)This lets you play back still imagedata.SLIDE SHOW (page 45)This lets you play back still imagedata in a certain order.VIDEO (page 49)This lets you play back movingimage data.PICTURESLIDE SHOWVIDEOB If the SD menu is not displayed when the SD button is pressed,—press the SD MENU button repeatedly until it is displayed or—the previous menu screen or image on an SD CARD screen may bedisplayed or played back.NOTE:B When the SD CARD screen is selected, the SD MENU button can be usedto return to a previous screen (up to the SD menu shown above).