Panasonic PT-AX100U Operating Instructions Manual

Panasonic PT-AX100U Operating Instructions Manual Manual pdf 24 page image

Remote control operation24 - ENGLISHBasic OperationYou can display one of the PICTURE orADVANCED menu items by pressingthe PICTURE ADJUSTMENT button.Press the button to switch betweenPICTURE and ADVANCED menu.Press F G to select the required menuitem and I H to adjust.Q PICTURE menu itemsPICTURE MODE, CONTRAST, BRIGHTNESS,COLOR, TINT, SHARPNESS, COLORTEMPERATURE and DYNAMIC IRISQ ADVANCED menu itemsGAMMA, CONTRAST, BRIGHTNESS, COLORMANAGEMENT, NR, MPEG NR, CINEMAREALITY and TV-SYSTEMYou can adjust a selected colorindividually and save and retrieveunder the PICTURE MODE setting.Press the COLOR MANAGEMENTbutton to open the menu.J Create a new profileQ Adjusting the selected colorSelect a color and adjust COLOR, TINT andBRIGHTNESS.1. Select the CURSOR menu and pressENTER.The projected image is captured, and the targetcursor is displayed.When the LOG is fully stored, the target cursorwill not be displayed. See "Managing storedlogs" on page 25.2. Move the cursor with F G I and H to therequired place to select a color and pressENTER.The color at the center of the target cursor issampled and the sample box is displayed onthe left of the cursor. The menu items aredisplayed on the upper part of the screen.3. Select a menu item and the I H to adjusteach item level.The result box is displayed on the right of thecursor and shows the adjusted color.Adjusting the imageNOTE:For each menu items description, see “MenuNavigation” on page 26.The screen will be cleared after 7 seconds withoutany operation.Setting your own colorprofileNORMALPROFILE SAVELOGCURSORPROFILETarget cursorSELECTCURSORRETURNENTERDEFAULTCOLORTINTBRIGHTNESSSampled colorSELECTCURSORRETURNENTERDEFAULTCOLORTINTBRIGHTNESSAdjusted color