POSITION MenuENGLISH - 33 SettingsJ Aspect ratio depend on signalsPress I H to cycle through the aspect ratiooptions. The cycle pattern depends on theconnected signals.If a PAL/625p (576p)/625i (576i) signal is input and thatsignal has an identification signal, the aspect ratio isautomatically switched to the required setting. You canswitch the system off manually.If the 4 edges of an image is partly dropped, you can usethis function to adjust and project it properly.Setting range: 0 to +10OVER SCAN is not available with PC signals.If the projector is aligned non-perpendicularly to thescreen, or if the projection screen has an angledsurface, you can vertically correct keystone.Setting range: -32 to 32You can adjust V - POSITION, H - POSITION, DOTCLOCK and CLOCK PHASE automatically whenconnecting via PC. Press ENTER to adjust these at thesame time.VIDEO/S-VIDEO4:3 \ 16:9 \ 14:9 \ JUST \ZOOM1 \ ZOOM2AUTO \ 4:3 \ 16:9 \ JUST \ZOOMNTSC signalPC (RGB)4:3 \ 16:9 \ V SCROLL4:3 \ 16:9VGA or SVGA signalsV SCROLL onlyWIDE768Not switchableWIDE480/600/720/768-2 signalsHDMI4:3 \ 16:916:9 \ H - FIT \ V - FIT \ ZOOM1 125 (1 080)/50i, 1 125 (1 080)/60i,1 125 (1 080)/50p, 1 125 (1 080)/60p,1 125 (1 080)/24p, 750 (720)/50p and750 (720)/60p signals4:3 \ 16:9 \ JUST \ ZOOM525p (480p) and 625p (576p) signalsYP BP R4:3 \ 16:9 \ 14:9 \ JUST \ZOOM1 \ ZOOM2625i (576i), 625p (576p)AUTO \ 4:3 \ 16:9 \ JUST \ZOOM525i (480i), 525p (480p)16:9 \ H - FIT \ V - FIT1 125 (1 080)/50i, 1 125 (1 080)/60i,1 125 (1 080)/50p, 1 125 (1 080)/60p,1 125 (1 080)/24p, 750 (720)/50p,750 (720)/60p signalsWSSOVER SCANEnlargeShrinkKEYSTONEImage OperationNOTE:You can correct the distortion ± 30 degrees fromthe vertical plane. For a better quality image,installing the projector with a minimum ofdistortion is recommended.Some distortion may be retained for Lens shiftadjustment.The distortion of the Main menu screen is notcorrectable.The result of the keystone correction will affect onthe aspect ratio and the size of the image.AUTO SETUP