Panasonic PT-CW230E Service Manual

Also see for PT-CX200EA: Operating instructions Operating instructions

Panasonic PT-CW230E Service Manual Manual pdf 27 page image

-27-● : Adjustment necessary ❍ : Check necessaryAdjustments after parts replacementDisassembly / Replaced partsOptical Unit Color Wheel Power Board Main BoardAdjustmentsFan voltage adjustment ● ●Auto calibration adjustment [PC] ❍Auto calibration adjustment [Component] ❍Color index adjustment-1 ● ●Color index adjustment-2 ●To enter the service modeTo enter the “Service Mode”, press and hold the MENU and SE-LECT button for more than 3 seconds, or press and hold theMENU button on the remote control for more than 20 seconds.The service menu appears on the screen as follows.To adjust service dataSelect the adjustment group no. by pressing the MENU button(increase) or SELECT button (decrease), and select the adjust-ment item no. by pressing the pointer e or d button, and changethe data value by pressing the 7 or 8 button. Refer to the “Ser-vice Adjustment Data Table” for further description of adjustmentgroup no., item no. and data value.To exit the service modeTo exit the service mode, press the button.Service adjustment menu operationService ModeInput Computer 1Group No. Data0 0 +0Ver. 1.00Data valueItem no.Group no.Firmwareversion no.Adjustments