Panasonic PT-CW230E Service Manual

Also see for PT-CX200EA: Operating instructions Operating instructions

Panasonic PT-CW230E Service Manual Manual pdf 5 page image

-5-SpecificationsModel No. PT-CW230U/E/EA PT-CX200U/E/EAPower supply AC100 V - 240 V 50 Hz/60 HzPower consumption100 V - 240 V 4.5 A-2.2 A, 350 WWhen [Standby mode] of [Setting] is set to [ECO]: 0.45 WWhen [Standby mode] of [Setting] is set to [Network]: 11.0 WDLP chipSize 0.65"(aspect ratio 16 : 10) 0.55"(aspect ratio 4 : 3)Display System One-unit DLP chip, DLP typeNumber of pixels 1 024 000 pixels(1 280 x 800 dots)786 432 pixels(1 024 x 768 dots)Lens Manual focusF 2.5, f 4.83 mmLuminous lamp 275 W UHM lampLight output *1 2500 lm 2000 lmApplicablescanningfrequency*2for RGB signal Horizontal 15 kHz to 93 kHz, Vertical 50 Hz to 120 HzDot clock frequency: 150 MHz or lessfor YPBPR signal[525i(480i)] Horizontal 15.75 kHz, Vertical 60 Hz[525p(480p)] Horizontal 31.5 kHz, Vertical 60 Hz[750(720)/60p] Horizontal 45 kHz, Vertical 60 Hz[1125(1080)/60i] Horizontal 33.75 kHz, Vertical 60 Hz[625i(576i)] Horizontal 15.63 kHz, Vertical 50 Hz[625p(576p)] Horizontal 31.25 kHz, Vertical 50 Hz[750(720)/50p] Horizontal 37.5 kHz, Vertical 50 Hz[1125(1080)50i] Horizontal 28.13 kHz, Vertical 50 Hz• HD/SYNC and V terminals are not compliant with 3 value composite SYNCfor Video signal (in-cluding S-video) Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hzfor HDMI signal525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60p,1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i• Displayable resolution: VGA to WUXGA (non-interlace)• Dot clock frequency: up to 162 MHzColor system 7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)Projection size 1.524 m -2.794 m (60"-110") 1.397 m -2.286 m (55"-90")Screen aspect ratio 16 : 10 4 : 3Projection scheme Ceiling/floor, front/rear, vertical upwards/downwardsSpeaker 1 (3.7 cm round-type)Maximum usable volume output 10WContrast ratio *1 2000 : 1 (all white / all black)Measurement, measuring conditions and method of notation all comply with ISO21118 international*1 :standards.For details of video signals that can be projected using this projector, refer to “List of compatible signals”.*2 :