Panasonic PT-CW33OE Operating Instructions Manual

Also see for PT-CW240E: Operating instructions

Contents

Panasonic PT-CW33OE Operating Instructions Manual Manual pdf 38 page image

Position38 - ENGLISHSettingsPositionSelect [Position] from the Main Menu (see “Howto operate menu” on page 33) and then selectthe item from the Sub Menu.Aspect RatioUse this function to choose your desired aspect ratio.Press ▲▼ to select [Aspect Ratio].1 )Press ► to display the choosing dialog2 )box.Press ◄► to select the desired item.3 )AutoThe projector identifies the video ID(VID) embedded in the image signalsand displays the image by automaticallyswitching the screen sizes between 4:3and 16:9.4:3When standard signals*1 are input, thepictures are displayed without changingthe aspect ratio.When wide-screen signals*2 are input,the pictures are displayed with theaspect ratio converted to 4:3.16:9When standard signals*1 are input, thepictures are displayed with the aspectratio converted to 16:9.When wide-screen signals*2 are input,the pictures are displayed withoutchanging the aspect ratio.16:10 This format is for 16:10 input sources,like wide screen laptop.*1: Standard signals are input signals with an aspectratio of 4:3 or 5:4.*2: Wide-screen signals are input signals with anaspect ratio of 16:10, 16:9, 15:9 or 15:10.NoteIf an aspect ratio which is different from the aspect ratiozfor the input signals is selected, the pictures will appeardifferently from the originals. Be careful of this whenselecting the aspect ratio.If using this projector in places such as cafes or hotels tozdisplay programs for a commercial purpose or for publicpresentation, note that adjusting the aspect ratio or usingthe zoom function to change the screen pictures maybe an infringement of the rights of the original copyrightowner for that program under copyright protection laws.Take care when using a function of the projector such asthe aspect ratio adjustment, zoom function, etc.If conventional (normal) 4:3 pictures which are not wide-zscreen pictures are displayed on a wide screen, theedges of the pictures may not be visible or they maybecome distorted. Such pictures should be viewed aswith an aspect ratio of 4:3 in the original format intendedby the creator of the pictures.PhaseAdjust to achieve an optimal image when there is aflickering image.Press ▲▼ to select [Phase].1 )Press ► to display the adjustment2 )dialog box.Press ◄► to adjust the level.3 )NoteDuring Computer input signal, [Phase] can be adjusted.zClockAdjust to achieve an optimal image when there is avertical flicker in the image.Press ▲▼ to select [Clock].1 )Press ► to display the adjustment2 )dialog box.Press ◄► to adjust the level.3 )NoteDuring Computer input signal, [Clock] can be adjusted.zH PositionShift the projected image position horizontally.Press ▲▼ to select [H Position].1 )Press ► to display the adjustment2 )dialog box.Press ◄► to adjust the level.3 )NoteDuring Computer input signal, [H Position] can bezadjusted.