Panasonic PT-CW33OE Operating Instructions Manual

Also see for PT-CW240E: Operating instructions

Contents

Panasonic PT-CW33OE Operating Instructions Manual Manual pdf 47 page image

LANENGLISH - 47 SettingsSelect [LAN] from the Main Menu (see “How tooperate menu” on page 33) and then select theitem from the Sub Menu.NoteThe following settings are set before the projector leaveszthe factory.DHCP OffIP address 192.168.10.100Subnet Mask 255.255.255.0Gateway 192.168.10.1DNS NONEIf you want to use a DHCP server, please make sure thatzthe DHCP server is enabled.For more information about the IP Address, SubnetzMask, Gateway, and DNS, please contact your networkadministrator.DHCPSet whether to use DHCP server.Press ▲▼ to select [DHCP].1 )Press ► to display the setting dialog2 ) box.Press ▲▼ to switch [On]/[Off].3 ) Press button to exit the switching andzgo back to the previous menu.Press ► to confirm.4 ) After selecting [On], the message about LANzrestarting will be displayed. The setting ofDHCP finishes when the message disappears.Press to exit.5 )On The projector will acquire the IPaddress automatically.OffUser must set the [IP Address],[Subnet Mask], [Gateway] and[DNS] manually.IP AddressSelect an IP Address of projector connected tonetwork.Press ▲▼ to select [IP Address].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press to exit.4 )Subnet MaskSelect Subnet Mask of projector for networkconnection.Press ▲▼ to select [Subnet Mask].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press to exit.4 )GatewaySelect Gateway of projector for network connection.Press ▲▼ to select [Gateway].1 )Press ► to display the setting dialog box.2 )Press ▲▼◄► to input digit numbers.3 )Press to exit.4 )DNSSelect DNS of projector for network connection.Press ▲▼ to select [DNS].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press to exit.4 )LAN