ENGLISH35If the focusing, zooming or positioning of the image projected on the screen is not successful, even though theprojector is properly positioned against the screen, you can adjust the focus, the zoom, or the vertical or horizontalposition of the image.Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitationis to protect the parts of the projector.Using the standard projection position as the reference, the optical axis shift function makes it possible to adjustthe projection position in the ranges shown in the figures below.Press the LENS button on the remotecontrol or on the control panel of themain unit.Pressing the button changes the setup screen inthe order of “LENS FOCUS”, “LENS ZOOM” and“LENS SHIFT”.Choose an item and adjust it usingbuttons.How to adjust the lensCautionBe careful not to catch your fingers between thelens and shroud when shifting the lens.How to adjust the lens focus, lens zoom and lens shift(optical shift)Adjustment range after lens position (optical shift)• The lens zoom adjustment menu will bedisplayed only when a lens with zoomfunction is being used.NoteLENSFOCUSLENSZOOMLENSSHIFTPT-D7700E