44On-screen menusBasic operations on menuscreenPress the “MENU” button.The MAIN MENU appears on the screen.Select the desired item with the orbutton.Selected items are displayed in blue.Press the “ENTER” button to establishyour selection.The submenu for the selected option will nowopen. (Example: PICTURE Menu)Highlight the desired adjustment itemwith the or button, then changeor adjust the parameter value with theor buttons.For the items such as “COLOR”, “TINT”, “CONTRAST”and “BRIGHT”, an individual adjustment screen with anindividual bar graph as shown below is displayed bypressing the ENTER button.• If no button is operated for approx. 5 seconds while theindividual adjustment screen is displayed, the screenwill return to the previous page.MAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITY:MENU SELECTENTER:SUB MENUMAIN MENUPICTUREPOSITIONADVANCED MENULANGUAGEOPTIONTEST PATTERNSIGNAL LISTSECURITY:MENU SELECTENTER:SUB MENUPICTUREPICTURE MODE DYNAMICCOLOR 50TINT 30COLOR TEMP. DEFAULTGAMMA 2.2CONTRAST 32BRIGHT 32SHARPNESS 6NOISE REDUCTION 2DYNAMIC IRIS 1:MENU SELECT:ADJUSTCONTRAST 32Returning to the previousscreen• When the “MENU” is on the screen, pressing the“MENU” button returns to the previous page.• When the MAIN MENU is on the screen, pressing the“MENU” button clears all menus from the screen.Menu items shown in graycharacters• Some menu items may not be valid for certain signalformats applied to the projector.The menu items that cannot be adjusted or used are shownin gray characters, and they cannot be selected.Menu items settingThe bottom prompt line differs on each menudepending on the selected menu option:• A prompt “ CHANGE” appears whenchanging the setting.• A prompt “ ADJUST” appears for aseparate bar graph.• When and buttons are displayed above orunder the items in the “OPTION” screen, theyindicate that there are more adjustment (items).Resetting to the factorydefaultSTD (standard) button is used to reset all of theprojector adjustment values to the default levels whichwere set at the time of shipment from the factory. It ispressed after the respective adjustment mode screenhas been displayed.• When the Menu screen is displayed:A “STD” indicator appears on the upper right cornerof the menu.PICTURE STDPICTURE MODE DYNAMICCOLOR 50TINT 30COLOR TEMP. DEFAULTGAMMA 2.2CONTRAST 32BRIGHT 32SHARPNESS 6NOISE REDUCTION 2DYNAMIC IRIS 1:MENU SELECT:ADJUST
