Panasonic PT-EX16K Operating Instructions Manual

Also see for PT-EX16K: Brochure Specifications Brochure

Contents

Panasonic PT-EX16K Operating Instructions Manual Manual pdf 24 page image

24Control commands via LANWhen WEB Control administrator rights password is set (Protect mode)Connection methodObtain the IP address and port number (Initial set value = 1024) of the projector and1)make a request for connection to the projector.Acquire the IP address from the menu screen of the projector, and the port number from the WEB controlpage.IP address : Obtain from MAIN MENU → [Network] → [Network status]Port No. : Acquire from the WEB control “Detailed set up” → “Command port setting” pageThere is a response from the projector.2)Response dataData section Blank Mode Blank Random numbersectionTerminationsymbol“NTCONTROL”(ASCII string)‘ ’0x20‘1’0x31‘ ’0x20“zzzzzzzz”(ASCII code hexadecimalnumber)(CR)0x0d9 bytes 1 byte 1 byte 1 byte 8 bytes 1 byteMode : 1 = Protect modeGenerate a 32-byte hash value from the following data using MD5 algorithm.3)“xxxxxx:yyyyy:zzzzzzzz”xxxxxx : Administrator rights user name for WEB CONTROL (Default user name is “admin1”)yyyyy : Password of above administrator rights user (Default password is “panasonic”)zzzzzzzz : 8-byte random number obtained in Step 2Command transmission methodTransmit using the following command format.Transmitted dataHeader Data section Termination symbolHash value(See above)‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0d32 bytes 1 byte 1 byte Undefined length 1 byteReceive dataHeader Data section Termination symbol‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0d1 byte 1 byte Undefined length 1 byteError responseError message Termination symbol“ERR1”“ERR2”“ERR3”“ERR4”“ERR5”“ERRA”Undefined control commandOut of parameter rangeBusy state or no-acceptable periodTimeout or no-acceptable periodWrong data lengthPassword mismatch(CR)0x0d4 bytes 1 byte

/ 27

Related manuals for Panasonic PT-EX16K