7NETWORK menu (continued)Network setupYou can make detailed wired LAN settings.Press ▲▼ to select [Network setup], and press 1The detailed [Network setup] screen will be displayed.Press ▲▼ to select an item, and change the setting according to the instructions.2DHCP(DHCP client function)On:If a DHCP server exists in the network to which theprojector is connected, the IP address will automatically beacquired.Off:If a DHCP server does not exist in the network to whichthe projector is connected, additionally set [IP address],[Subnet mask] and [Default gateway].IP address(Display of IP address and setting)Enter the IP address if DHCP server is not used.Subnet mask(Displaying and setting the subnet mask)If not using a DHCP server, enter the subnet mask.Default gateway(Display of gateway address and setting)Enter the gateway address if DHCP server is not used.DNSSets IP address of the DNS server.“Glossary” (See page26)Press ▲▼◄► to select [Set], and press 3Save the current network settings.Before using the DHCP server, make sure the DHCP server is already functioning.For details of IP address, subnet mask, gateway and DNS, ask the network administrator.Default wired LAN settingsThe following settings are set before the projector leaves the factory.DHCPOffIP address192.168.10.100Subnet mask255.255.255.0Default gateway192.168.10.1DNS 1DNS 2