Panasonic PT-F100NTE Network Manual

Also see for PT-FW100NTE: Operating instructions User manual Quick guide Quick guide Advanced operation guide

Contents

Panasonic PT-F100NTE Network Manual Manual pdf 35 page image

35Various projection methods (cont.)Press the [MULTI-LIVE] button on the remote control to turn the projection screeninto a full screen display (the status when no index window is displayed).If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, thescreen will switch over to a full screen display.1Check the status indication on the launcher to make sure that transmission ispossible (check that the green lamp is lit).2Click [ ] on the launcher.The current computer screen is transmitted to the selected projector. In the live mode the projector is occupied by asingle computer, so operations from other computers are not possible.Picture quality or other options can be set on the ] on the launcher.3Quitting live modeClick [ ] on the launcher again.Connect a computer to a projector, and display the computer screen over the entire projection screen.Live mode• For presentations in live mode, the [PAGE Ÿź] buttons on the remote control will function in the same way as the computer’sPage Up and Page Down keys. (When using “Presenter View” of “PowerPoint”, the [PAGE Ÿź] buttons of the remote controlcorrespond to Back space key and Space key.) This means that if you run a computer application that supports the Page Upand Page Down keys, the presentation screen can be changed using the remote control.• Some portions of images are not projected under some applications (MS Office Assistant, IME Bar, animation and locus of themouse cursor, and others).• If the connection error occurs during projection, the message [Stop “Live mode”] will appear, then restart projection by clickinglauncher buttons.• Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images inlive mode. (See page 58)