Panasonic PT-F100NTE Network Manual

Also see for PT-FW100NTE: Operating instructions User manual Quick guide Quick guide Advanced operation guide

Contents

Panasonic PT-F100NTE Network Manual Manual pdf 59 page image

59Select [STATUS] at the network menu and press the [ENTER] button.Your current settings appear.Verifying settingsPT-FW100NTUSER1RETURNENTERSELECTLANGUAGEOPTIONSECURITYNETWORKPOSITIONPICTURE WIRED LANWIRELESS LANNAME CHANGEINPUT PASSWORDPASSWORD CHANGENETWORK STANDBYWEB CONTROLOFFONLIVE MODE CUT INSTATUSINITIALIZEOFFOFFNetwork setting of the projector (cont.)You can return the changed settings to the initial conditions.Select [INITIALIZE] at the network menu and press the [ENTER] button.1Select [OK] with the [ ] buttons and press the [ENTER]button.2PT-FW100NTRETURNSELECTENTERUSER1OFFONWIRED LANWIRELESS LANNAME CHANGEINPUT PASSWORDPASSWORD CHANGENETWORK STANDBYWEB CONTROLLIVE MODE CUT INSTATUSINITIALIZELANGUAGEOPTIONSECURITYNETWORKPOSITIONPICTUREOFFOFFINITIALIZERETURNENTERSELECTINITIALIZEOK CANCELReturning to the Initial SettingsYou will be prompted to enter the password if [ON] has been selected as the [INPUT PASSWORD] setting on the[ SECURITY] menu.The status of the following will appear.WIRED LAN WIRELESS LANDHCP “OFF” - “ON” ANTENNA LEVEL (The strength of the connection will appear.)IP ADDRESS (See page 53) NETWORK “– – –”, “1” - “4”, “USER1” - “USER3”SUBNETMASK (See page 53) MODE “AD-HOC” - “INFRASTRUCTURE”GATEWAY (See page 53) CHANNEL Refer to page 5 for usable channels.MAC ADDRESS SSID (See page 55)AUTHENTICATION “OPEN” - “SHARED” - “WPA-PSK”DEFAULT KEY “-” - “1” - “4”ENCRYPTION “NONE” - “WEP” - “TKIP” - “AES”DHCP “OFF” - “ON”IP ADDRESS (See page 56)SUBNETMASK (See page 56)GATEWAY (See page 56)MAC ADDRESS