Panasonic PT-F200NTE/PT-FW100NTE User Manual

Also see for PT-FW100NTE: Operating instructions Quick guide Quick guide Network guide Advanced operation guide

Contents

Panasonic PT-F200NTE/PT-FW100NTE User Manual Manual pdf 30 page image

30Network setting of the projector (cont.)Select [NEXT] on the IP address setting window to switch to the wireless setting window.Make the settings related to the wireless connection between the projector and the network.Wireless settingsWIRELESS DETAILED SETUPNEXT CANCELRETURNRETURNSELECTENTERMODEAUTHENTICATIONENCRYPTIONCHANNELOPENAD HOC1NONESSID Panasonic Projector2/3USER1SSID : If the mode is [INFRASTRUCTURE ], enter the SSID registered at the access point. If the mode is[AD HOC], enter the same character string as that of SSID set on the computer to be connected.MODE : Select [AD HOC] or [INFRASTRUCTURE].AD HOC : Connect projector and computer directly without access point.INFRASTRUCTURE : Connect through access point.AUTHENTICATION : Set the user authentication method used by the network to be connected.OPEN : Select when making a connection using [AD HOC], or when the access point authentication method isOpenSystem .SHARED : Select when making a connection using [AD HOC], or when the access point authentication method isShared Key .WPA-PSK : Select when the access point authentication method is WPA-PSK.ENCRYPTION : Select the encryption method to be used for communication between the projector and the network.NONE : Select when transmit without encryption. It is selectable only when [AUTHENTICATION] is [OPEN] or[SHARED].WEP : Select when ENCRYPTION is WEP.TKIP : Select when ENCRYPTION is TKIP.Selectable when [AUTHENTICATION] is [WPA-PSK].AES : Select when ENCRYPTION is AES.Selectable when [AUTHENTICATION] is [WPA-PSK].“Glossary” (See page 45)• If you are unable to connect to the wireless LAN through the access point even after performing the steps in “ヂ Projectorsettings (See page 15),” contact the manufacturer of the access point.• This projector does not conform to WPA2, IEEE 802.1x.