Panasonic PT-F200NTE/PT-FW100NTE User Manual

Also see for PT-FW100NTE: Operating instructions Quick guide Quick guide Network guide Advanced operation guide

Contents

Panasonic PT-F200NTE/PT-FW100NTE User Manual Manual pdf 31 page image

31Network setting of the projector (cont.)Additionally perform the following setting using the [AUTHENTICATION] setting.When setting [OPEN] or [SHARED] as authentication and setting [WEP ] as the encryption method:DEFAULT KEY : Set 1 – 4 numerals for the default key.KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY].Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digitstring for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for thehexadecimal format).When setting [WPA-PSK ] as authentication : Set key and select [OK].Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.“Glossary” (See page 45)Important video/audio data is protected because AES encryption processing takes place in advance for all network numbers,even if [ENCRYPTION] is set to [NONE].“Glossary” (See page 45)WIRELESS DETAILED SETUPOK CANCELRETURNRETURNSELECTKEY1KEY2KEY3KEY4DEFAULT KEY 13/3USER1The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.SSID : Panasonic ProjectorDHCP : OFFIP ADDRESS : 192.168.11.100SUBNETMASK : 255.255.255.0GATEWAY : 192.168.11.1MODE : AD HOCAUTHENTICATION : OPENENCRYPTION : NONEDefault settings of [USER1]-[USER3]