Panasonic PT-LB2U Operating Instructions Manual

Also see for PT-LB1U: Operating instructions Operating instructions Operating instructions

Panasonic PT-LB2U Operating Instructions Manual Manual pdf 10 page image

Preparation10  ENGLISHStart-up displayThe LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the first time orafter it has been initialized. ( page 39)Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings.NOTE:When the projector is turned on for the first time, you may be required to adjust the “zoom ring” and “focus ring”• ( page 11)on the top of the projector body to make the menu screen clearer.For details, see POSITION THE IMAGE. ( page 22)1 To select the desired language.PLEASE SELECT LANGUAGE.SELECTENTERINITIAL SETTING2 ENTERTo proceed to INITIAL SETTINGmenu.1 To select the desired menu. INSTALLATION HIGH ALTITUDE MODE2 To change the settings in themenu.RETURNSELECTENTERINSTALLATIONINITIAL SETTINGFRONT/DESKHIGH ALTITUDE MODESWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).OFFINSTALLATION ( page 15, 37)FRONT/DESKPut it on a desk or floor and projectfrom the frontFRONT/CEILINGMount it on the ceiling with a ceilingmount bracket (sold separately) andproject from the frontREAR/DESKPut it on a desk or floor and projectfrom the rear (a translucent screen isrequired)REAR/CEILINGMount it on the ceiling with a ceilingmount bracket (sold separately) andproject from the rear (a translucentscreen is required)HIGH ALTITUDE MODE ( page 7, 37)OFFUse in normal environment(below 1 400 m (4 593 ft) above sealevel)ON Use at high altitude(at 1 400 - 2 700 m (4 593 - 8 858 ft)above sea level)3 ENTERNOTE:To return to• LANGUAGE menu, press [RETURN] inINITIAL SETTING menu.LANGUAGE INITIAL SETTINGPreparation