Panasonic PT-LB2U Operating Instructions Manual

Also see for PT-LB1U: Operating instructions Operating instructions Operating instructions

Panasonic PT-LB2U Operating Instructions Manual Manual pdf 42 page image

Settings42  ENGLISHMenu operation (continued)▌CONTROL DEVICE SETUPYou can enable/disable the button operations of thecontrol panel and remote control.Change settingChangesettingChangesettingChange settingCONTROL PANELENABLE Enable the button operationsDISABLE Disable the button operationsREMOTE CONTROLLERENABLE Enable the button operationsDISABLE Disable the button operationsNOTE:If• DISABLE is selected and [ENTER] is pressed, theconfirmation screen appears. Select OK and press[ENTER].If any button is pressed after• CONTROL PANEL is setto DISABLE, the password screen appears. Input thepassword which is set in the SECURITY menu. (If nooperation is done, the password screen disappears in 10seconds.)If you set both• CONTROL PANEL and REMOTECONTROLLER to DISABLE, all buttons' operations ofthe control panel and remote control are disabled and youcannot turn off the power.How to clear DISABLE:During the standby mode or projection, press andhold [ENTER] and [MENU] for at least 2 seconds, andCONTROL PANEL is set to ENABLE.Change the setting of REMOTE CONTROLLER with thecontrol panel.NETWORK MENURemote control Control panelMENU RETURNENTERFREEZEAVMUTECOMPUTER VIDEODEFAULT FUNCTION WIN.INDEX-MENUENTERDEFAULTSTANDBY(R)ON(G)LAMPTEMPMENU FUNCTIONENTERINPUTSELECTMENUENTERMENU RETURNENTERFREEZEAVMUTECOMPUTER VIDEODEFAULT FUNCTION WIN.INDEX-MENUENTERDEFAULTSTANDBY(R)ON(G)LAMPTEMPMENU FUNCTIONENTERINPUTSELECTMENUENTERSet the selected item with [].NOTE:These items are set for network connection with a•computer. For details of the PJ Link and network, see“Network Operation Manual”.WIRED LANYou can set up a wired LAN.NAME CHANGEYou can change the name of the projector.NETWORK CONTROLWhen controlling the projector with a computer on thenetwork, you must turn this function ON.STATUSYou can display the status of the network setting.INITIALIZEYou can reset the settings of the network to the factorydefault settings.NOTE:If• PASSWORD (SECURITY menu) is activated, when thenetwork setting is initialized, you will be required to input thepassword.