Panasonic PT-LB3U Operating Instructions Manual

Also see for PT-LB1VE: Operating instructions Information

Contents

Panasonic PT-LB3U Operating Instructions Manual Manual pdf 11 page image

11Using WebBrowser (cont.)Monitor information windowThis page indicates the projector status.To access this page from other pages, click [Status] in the main menu (at the left of the window).Projector statusOn this window, click the [Projector status] tab.Network statusOn this window, click the [Network status] tab.The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View] →[Refresh].If [SELF TEST Error (Detail)] appears on the Monitorinformation window, click it to view the error details.If [FAILED] appearsItem DescriptionMAIN CPU BUS There is a problem with a microcontroller circuit. Contact your dealer.FAN There is a problem with the fan or fan drive circuit. Contact your dealer.INPUT AIR TEMPERATURE Input air temperature is high. The projector is likely being used in a high temperatureenvironment such as near heating equipment.OUTPUT AIR TEMPERATURE Temperature surrounding the lamp is high. The exhaust vent is likely blocked.LAMP REMAIN TIME The lamp has been used for longer than its rated useful life, and it is time to replace it.LAMP STATUS The lamp could not be lit.Allow the bulb of the light source to cool, and then turn on the projector.INPUT AIR TEMP.SENSOR There is a problem with the air intake temperature sensor. Contact your dealer.OUTPUT AIR TEMP.SENSOR There is a problem with the exhaust temperature sensor. Contact your dealer.BATTERY The battery must be replaced. Contact your dealer.AIR FILTER The air filter is clogged with dust.Clean the air filter. (See Page 46 of "Operating Instructions Basic Manual")