Panasonic PT-LB50NTU Operating Instructions Manual

Also see for PTLB50U - XGA LCD Projector: Specifications

Contents

62-ENGLISH' Install the lamp unit cover, andthen use a Phillips screwdriverto securely tighten the lampunit cover fixing screws.( Connect the power cord.) Press the POWER button sothat a picture is projected ontothe screen.*Press the MENU button todisplay the menu screen, andthen press the F or G buttonto select the “OPTION” menu.+ Press the ENTER button, andthen press the F or G buttonto select “LAMP RUNTIME”., Press and hold the ENTERbutton for approximately 3seconds.The “LAMP RUNTIME” screenwill be displayed.- Press the POWER button toturn off the power.. Disconnect the power cordafter the POWER button on theprojector illuminates red.This will reset the cumulativeusage time for the lamp unit to “0”.NOTE:B Be sure to install the lamp unitand the lamp unit coversecurely. If they are not securelyinstalled, it may cause theprotection circuit to operate sothat the power cannot be turnedon.NOTE:B Press any button other thanthe POWER button to cancelthe “LAMP RUNTIME” screen.NOTE:BIf “DIRECT POWER ON” in the“OPTION” menu has been setto “ON”, projection will startafter the power cord isconnected. Refer to page 51for details.