Panasonic PT-LB51E Operating Instructions Manual

Also see for PT-LB51E: Operating instructions Service manual

Contents

Panasonic PT-LB51E Operating Instructions Manual Manual pdf 10 page image

Precautions with regard to safetyENGLISH - 10ImportantInformationDo not mix old and new batteries.If the batteries are inserted incorrectly, they mayexplode or leak, and fire, injury or contamination ofthe battery compartment and surrounding area mayresult.Remove the used batteries from the remote controlpromptly.If you leave used batteries in the remote control foran extended period of time, it may cause liquidleaking, abnormal internal temperature rising orexplosion.If not using the projector for an extended period oftime, disconnect the mains plug from the mainssocket and remove the batteries from the remotecontrol.If dust builds up on the mains plug, the resultinghumidity may damage the insulation, which couldresult in fire.Keeping or leaving the remote control with batteriesinside may cause insulation deterioration, electricalleakage or explosion which could result in fire.Do not put your weight on this projector.You could fall or the projector could break, and injurymay result.Be especially careful not to let young children standor sit on the projector.Disconnect the mains plug from the mains socket asa safety precaution before carrying out any cleaning.Electric shocks can result if this is not done.If the lamp has broken, ventilate the roomimmediately. Do not touch or bring your face closeto the broken pieces.Failure to observe this may cause the user to absorbthe gas which was released when the lamp broke andwhich contains nearly the same amount of mercuryas fluorescent lamps, and the broken pieces maycause injury.If you believe that you have absorbed the gas or thatthe gas has got into your eyes or mouth, seekmedical advice immediately.Ask your dealer about the replacement of the lampunit and check the inside of the projector.Ask an Authorised Service Centre to clean inside theprojector at least once a year.If dust is left to build up inside the projector withoutbeing cleaned out, it can result in fire or problemswith operation.It is a good idea to clean the inside of the projectorbefore the season for humid weather arrives. Askyour nearest Authorised Service Centre to clean theprojector when required. Please discuss with theAuthorised Service Centre regarding cleaning costs.We are constantly making efforts to preserve and maintain a clean environment. Please take non repairableunits back to your dealer or a recycling company.Do not subject the projector to excessive vibrationor shocks.The projector lens need to be handled with care.Be sure to use the accessory carrying bag whenmoving the projector.When placing the projector inside the carrying bag,position it so that the lens is facing upward. Do notplace the projector with its adjustable legs extendedand do not put anything else in the bag other than theprojector, cables and the remote control unit.Avoid setting up in places which are subject tovibration or shocks.The internal parts can be damaged, which may causemalfunctions or accidents.Avoid setting up in places which are subject tosudden temperature changes, such as near an airconditioner or lighting equipment.The life of the lamp may be shortened or the projectormay be turned off. See “TEMP indicator” on page 40.Do not set up the projector near high-voltage powerlines or near motors.The projector may be subject to electromagneticinterference.If installing the projector to the ceiling, ask aqualified technician to carry out all installation work.You will need to purchase the separate installation kit(Model No. ET-PKB50). Furthermore, all installationwork is should only be carried out by a qualifiedtechnician.If using this projector at high elevations(above 1 400 m), set the HIGHLAND to ON. See“HIGHLAND” on page 38.Failure to observe this may result in malfunctions orthe life of the lamp or the other components may beshortened.Cautions when transportingCautions when installing