Panasonic PT-LB51E Operating Instructions Manual

Also see for PT-LB51E: Operating instructions Service manual

Contents

Panasonic PT-LB51E Operating Instructions Manual Manual pdf 48 page image

AppendixTechnical InformationENGLISH - 48J Cable specifications(When connected to a personal computer)J Control commandsCommand Control contents RemarksPON Power ONIn standby mode, all commands other than the PON command areignored.The PON command is ignored during lamp ON control.POF Power OFFIf a PON command is received while the cooling fan is operating after thelamp has switched off, the lamp is not turned back on again straight awayin order to protect the lamp.AVL Volume Parameter000 - 063 (Adjustment value 0 - 63)IIS INPUTParameter:VID = VIDEORG1 = COMPUTER1SVD = S-VIDEORG2 = COMPUTER2NWP = WIRELESS (PT-LB51NTE only)Q$S Lamp conditionqueryCall back0 = Standby1 = Lamp ON control active2 = Lamp ON3 = Lamp OFF control activeOSH SHUTTERTurning off the projection temporarily.Send the command to switch between ON and OFF.Do not send the command consecutively.If a command other than “OSH” is sent to the projector when the shutterfunction is used, the “ER401” command will be sent from the projector tothe computer and the shutter function will be turned off.Projector PC (DTE)