Panasonic PT-LW80NTE Operating Instructions Manual

Also see for PT-LW80NTE: Specifications

Contents

Panasonic PT-LW80NTE Operating Instructions Manual Manual pdf 20 page image

ENGLISH - 20Basic OperationSwitching the projector on/offJ Connecting1. Make sure the shape of the mains plug and theAC IN terminal on the back of the projector match,then push the plug all the way in.2. Align the side of the power cord secure lock withthe side guide rail of the AC IN terminal of theprojector and slide it in.3. Place the latch to the latch catcher and press untilit clicks.4. Connect the mains lead to a mains socket.5. The POWER and POWER LOCK indicators lightin red and the projector stays in standby mode.J Direct power on functionIf the DIRECT POWER ON in OPTION menu is setto ON, connect the mains lead to a mains socketand the projection will start even when the controlpanel is disabled or the POWER button is locked.See “DIRECT POWER ON” on page 38.If the DIRECT POWER ON is set to OFF, theprojector will be at the same mode as lastunplugged, standby mode or projection mode.J Disconnecting1. Unplug the mains lead from the mains socket.2. Depress the latch and slide the cover off.3. Slide the power cord secure lock up along the sideguide rail and remove.4. Hold the plug and unplug the mains lead from theAC IN terminal on the back of the projector.POWER indicator lights in orange if the internalcooling fan is still operating by internal power supply.J Direct power off functionYou can switch off the electric power supply anytime by unplugging the mains plug from the mainssocket or by switching off the main power. Theinternal lamp cooling fan keeps operating by theinternal power supply, and stops automaticallywhen cooled enough.Mains leadRail guideLatchLatchRail guideNOTE:• Do not use other than a provided mains lead.• Ensure all the input devices are connected and turned off before connecting the mains lead.• Do not force the connector as this may damage the projector and/or the mains lead.• Dirt or dust build-up around plugs may cause fire or electrical hazards.• Switch off the power to the projector when not in use.• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may takea while to start the projection.• Do not put the projector into the carrying bag with the POWER indicator lit.