Panasonic PT-LW80NTE Operating Instructions Manual

Also see for PT-LW80NTE: Specifications

Contents

Panasonic PT-LW80NTE Operating Instructions Manual Manual pdf 41 page image

ENGLISH - 41 SettingsSECURITY menuJ Entering the SECURITY menuEvery time when you apply to the SECURITYmenu, you will be asked to perform the passwordoperation.Q Before you change the password toyour originalPerform to input the following factory defaultpassword operation.1. Perform F H G I F H G I.2. Press the ENTER button.Q After you change the passwordYou can change to your original password in thePASSWORD CHANGE menu.1. Perform the original password operation.2. Press the ENTER button.You can activate the security system and the passwordoperation will be asked to perform when projecting modestarted. Unless you perform the correct passwordoperation, all of the button controls will be disabledexcept the POWER button.OFF DeactiveON ActiveYou can change the password operation to your original.1. Press a series of button operation up to 8 as apassword by using F G I and H buttons.2. Press the ENTER button.3. Press the exact same series of button operationyou entered in the NEW password box forconfirmation.If a series of button operation is incorrect, you will beasked to perform again.4. Press the ENTER button.You can set your original text, such as company name orURL information, to display regularly at the bottom of theprojected image while projecting.OFF DeactiveON ActiveNOTE:• The factory default password is valid until you changethe password in PASSWORD CHANGE menu.• The entered password operations will appear asasterisks in the box.• When the projector is initialised, it will be reset to thefactory default password operation.MENU RETURNRemote control Control panelSee “Navigating through the MENU” on page 29.See “Main menu and Sub-menu” on page 30.PICTUREPOSITIONINPUT PASSWORDPASSWORD CHANGETEXT DISPLAYTEXT CHANGEPASSWORDLANGUAGEOPTIONSECURITYWIRELESSOFFOFFENTERRETURNINPUT PASSWORDNOTE:• When you activated the security system, make sure tochange the password to your original for safety.• The security system is deactivated by default and wheninitialised.• When the projector is initialised, it will be reset to thefactory default password operation.PASSWORD CHANGENOTE:• The entered password operations will appear asasterisks in the box.• Change your password regularly.• Do not use too simple password to guess.TEXT DISPLAY