Panasonic PT PT-LB90NT Network Operation Manual

Also see for PT-LB90NT: Specification sheet Specifications

Contents

Panasonic PT PT-LB90NT Network Operation Manual Manual pdf 65 page image

65Time settingsClick [Detailed set up]→[Adjust clock] in the menu.Time zone : Select the time zone and click [Settime zone].Time : Enter the current date and time in[Date] and [Time], and then click [Setdate and time].Email settingsYou can specify two email recipients.Click [Detailed set up]→[E-mail set up] in the menu.• [MAIL SERVER]ENABLE : Enable or disable email transmission.SMTP SERVER NAME : Enter the SMTP server name.• [MAIL OPTION]MAIL FROM : Enter the sender’s email address.MEMO : Enter a description of the sender.• [TEMPERATURE WARNING SET UP]MINIMUM TIME : Enter the interval for sending email.INPUT AIR TEMPERATURE: Select the temperature of the intakesensor at which to send a warningmessage.• [E-MAIL ADDRESS]E-MAIL ADDRESS : Enter the email addresses of therecipients.MAIL CONTENTS : Change the type of message as desired.When sending messages to mobile phones, select “SIMPLE.”ERROR : Select ON to send email when errors occur.LAMP RUNTIME : Select ON to send email when “at REMAIN” is reached.FILTER REMAINING TIME : Select ON to send email when “at REMAIN” is reached.INPUT AIR TEMPERATURE: Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] isexceeded.PERIODIC REPORT : Send a message with the projector status at the selected date and time.When [submit] is clicked, the settings are applied.Using WebBrowser (cont.)Connection testYou can confirm if a network connection is established with Mail server,POP server, DNS server or the like.Click [Detailed setup] → [Ping test] from the network main menu.Destination IP address: Enter the IP address of the server you want totest, and then click [Submit].If succeeded in connection, the following display appears.If failed in connection, the following display appears.