Panasonic PT-TW331RE Operating Instructions Manual

Contents

Panasonic PT-TW331RE Operating Instructions Manual Manual pdf 44 page image

Options44 - ENGLISHSettingsSelect [Options] from the Main Menu (see “Howto operate menu” on page 34) and then selectthe item from the Sub Menu.Auto SourceSet the automatic signal search function when poweron or the source of the signal being received is lost.Press ▲▼ to select [Auto Source].1 )Press ► to display the setting dialog box.2 )Press ◄► to switch [On]/[Off].3 )OnIt will automatically search anddisplay the signal sources markedin the [Input] when power on or thesource of the signal being receivedis lost.Off When the source of the signalbeing received is lost, it will notsearch other sources.Search and display order: [Computer 1]z [Computer 2]  [HDMI]  [Video] [Computer 1] .InputSet the automatic search signal source for [AutoSource].Press ▲▼ to select [Input].1 )Press ► to display the setting dialog box.2 ) The [Input] menu dialog box is displayed.zPress ▲▼ to select the input you want3 )to search and press ►.The input with a check mark will be able to bezsearched when [Auto Source] is set to [On].To remove the check mark, choose the desiredzitem and press ►.Auto Power Off (Min)Set the time to automatically turn off the projectorwhen there is no signal input.Press ▲▼ to select [Auto Power Off1 )(Min)].Press ► to display the adjustment2 )dialog box.Press ◄► to adjust off timer (min).3 ) When this function is set to [0 (min)], it is disable.zYou can set the time in 5 minutes intervals andzthe longest set time is 120 minutes.Note60 seconds before the auto power off, the countdownzscreen will appear. During countdown, the screen willdisappear if there is signal input or operation to theprojector.Lamp SettingsDisplays and sets detail of the lamp settings.Press ▲▼ to select [Lamp Settings].1 )Press ► to display the setting dialog2 )box.Lamp Hours Used (Normal)JDisplays the used lamp hours under [Normal]zlamp power mode.Lamp Hours Used (ECO)JDisplays the used lamp hours (in real time)zunder [AUTO] / [ECO1] / [ECO2] lamp powermode. The time is displayed as the sum of thetime under each setting of [AUTO], [ECO1] and[ECO2] lamp power mode.Lamp Life ReminderJPress ▲▼ to select [Lamp Life1 )Reminder].Press ► to display the setting dialog box.2 )Press ◄► to switch [On]/[Off].3 )On Displays the lamp warning message.(Æpage 57)Off The warning lamp message will notbe displayed.Options