S P E C F I L EPT-VW431DLCD ProjectorAs of September 2012SFL12M0153 / 1 3COMPUTER (RGB) 2 IN / 1 OUTR, G, BVIDEO INS-VIDEO INCOMPUTER AUDIO IN 1COMPUTER AUDIO IN 2 / MIC INVIDEO/S-VIDEO AUDIO INAUDIO OUTSERIAL INLAN/DIGITAL LINKPower cord lengthCabinet materialsDimensions (W × H × D)WeightOperation noiseOperating temperatureOperating humidityRemote control unitPower supplyOperation range* 6Dimensions (W × H × D)WeightSupplied accessoriesOptional accessoriesReplacement lamp unitReplacement filter unitCeiling mount bracketBracket assemblyDigital interface boxD-sub HD 15-pin (female) × 1(input/output selectable using on-screen menu.)G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;B, R: 0.7 Vp-p, 75 ohms;HD/VD, SYNC: high impedance, TTL (positive/negative)NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.RCA pin × 1, 1.0 Vp-p, 75 ohmsMini DIN 4-pin × 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohmsM3 (L, R) × 1, 0.5 VrmsM3 (L, R) × 1, 0.5 VrmsRCA × 2 (L/R × 1), 0.5 VrmsM3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)D-sub 9-pin (female) × 1, for external control (RS-232C compliant)RJ-45 × 1, for network connection/DIGITAL LINK, 100Base-TX/10Base-T, compliant with PJLink™2.0 m (6 ft 7 in)Molded plastic379 × 107 * 4 × 305* 5 mm(14-29/32 × 4-7/32 * 4 × 12* 5 inches)Approximately 4.8 kg (10.6 lbs)37 dB ( LAMP POWER : NORMAL ), 29 dB ( LAMP POWER : ECO )0 – 40 °C (32 – 104 °F)20%– 80% (no condensation)3 V DC (R03/LR03/AAA type battery × 2)Approximately 7 m (23 ft) when operated from directly in front of thesignal receptor52 × 110 × 18 mm (2-1/16 × 4-11/32 × 23/32 inches)Approx. 67 g (2.4 oz) (including batteries)Power cord (× 1) (× 2 for PT-VW431DEA)AC power cord holder (× 1)Wireless remote control unit (× 1)Batteries for remote control (R03/LR03/AAA type × 2)Carrying bag (× 1)Computer cable (1.8 m (5 ft 11 in), for VGA) (× 1)Software CD-ROM (Logo Transfer Software, Multi Projector Monitoringand Control Software) (× 1)ET-LAV200ET-RFV200ET-PKV100H (for high ceilings)ET-PKV100S (for low ceilings)ET-PKV200BET-YFB100Weights and dimensions shown are approximate. Specifications subject to change without notice.*1 When the STANDBY MODE is set to ECO , network functions such as power on over the LAN network will not operate. Also, only certain commandscan be received for external control using the serial terminal.*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.*3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).*4 With legs at shortest position.*5 Protruding parts not included.*6 Operation range differs depending on environments.