55With a PCUsing MotionDV STUDIO(PV-GS35 Only)When the OS is Windows XP/2000/Me, theCamcorder can be connected to the personalcomputer with the DV Cable.When the OS is Windows XP/2000, the Camcordercan be connected to the personal computer with theUSB Cable, however, Video Stream Driver must beinstalled.• Do not connect the USB Cable until the VideoStream Driver is installed.Operating environmentOS:IBM PC/AT compatible personal computer withpre-installed:Microsoft Windows XP Home Edition/ProfessionalSP1 or laterMicrosoft Windows 2000 Professional SP4 or laterMicrosoft Windows Me (Millennium Edition)(Only in DV connection)CPU:Intel Pentium III 700 MHz or higher/AMD Athlon 1 GHzor higher (including compatible CPU)Graphic display:High Color (16 bit) or more(32 bit or more recommended)Desktop resolution of 1 024 × 768 pixels or more(Supporting the overlay of DirectDraw)4 MB or more video memorySound:PCM sound source (Compatible Direct Sound)RAM:256 MB or more(Adding more memory enables you to operate thepersonal computer more comfortably.)Hard disk:Ultra DMA – 33 or moreFree hard disk space:640 MB(When you capture video, 1 GB is needed for data ofapprox. 4 minutes.)Interface:DV (IEEE1394) terminal (IEEE1394.a)USB 2.0 (Hi-Speed compliant)DirectX 9.0b or laterWindows Media Player 6.4 or laterOther requirements:Mouse• For other information about MSN Messenger, pleaserefer to Help.• If the Camcorder is used as a Web Cameracontinuously for two hours, the communication isautomatically shut OFF. In this case, restart MSNMessenger and set up the communication again.• When access is finished, close MSN Messenger,then turn off the Camcorder. Finally, disconnect theUSB Cable.8 Confi rm the [Panasonic DVC Web CameraDevice] 1 is selected.17 Click [Web Camera Settings...] in the[Tools] menu.3 Please carefully read the displayedcontents and then proceed.4 After the setup is completed, sign in andstart the MSN Messenger.5 Click on [Audio Tuning Wizard...] in the[Tools] menu to confirm that equipment isconnected correctly.6 Select [USB Audio Device] in the[Microphone] menu.